Home > Connectivity
Connectivity
Kinéis offers you the following services:
Collecting messages and sending commands • Location • Sending of alerts
Low-data rate connectivity
- Collecting messages of about 20 bytes
- Transmitted with a power from 250 to 500 mW
- Transmission protocol when satellites pass overhead
- Sending data from specific sensors
- Data reception in less than 15 minutes
The solution to
Devices can receive messages from users and satellites
- Reception of specific commands sent to the device
- Reception of satellite parameters to optimize transmission and power consumption
- Acknowledgement of messages sent by the device to the user
The solution to
The devices are located directly from the satellites by exploiting the Doppler effect
- The Doppler effect has been used by the Argos system to locate objects, well before the emergence of GNSS (GPS, Galileo, etc.)
- Native geolocation
- Accuracy to within approx. 150 m
- Tamper-proof
- Can be fine-tuned using a GNSS sensor on board the device
The solution to
Devices send messages, only when you need them
- Sending a message only under certain conditions
- Very low power consumption, autonomy of several years
- Very little data consumption
- Very low connectivity price
The solution to
Kineis Data plan
KIN’UP 4
2€
/month*
4 messages/day
Standard message:
19 bytes
Per device
KIN’UP 6
2.70€
/month*
6 messages/day
Standard message:
19 bytes
Per device
KIN’UP 24
8€
/month*
24 messages/day
or 1 message/hour
Standard message:
19 bytes
Per device
KIN’ALERT
1€
/month*
One message per minute during a defined time slot
Per device
KIN’FLEX
0.015€
/msg*
Pay per use offer for a minimum volume of data
Monthly message pack to share over a device pool or Hybridization
Pool device
* Pricing subject to a volume of devices and a contractual commitment
